破壁專用粉碎機：這類破壁專用粉碎機一般的質量很好不容易損壞。而日常的維修就顯得比較重要。下面就是破壁專用粉碎機這類粉碎機的維護重點。
This kind of special crusher broken broken: special crusher general quality is not easy to damage. And daily maintenance is more important. Here is the focus on maintaining this kind of special crusher crusher broken.
l、檢查破壁專用粉碎機軸承的潤滑情況是否良好
L, check the lubrication of the bearing wall special crusher is good
2、檢查所有緊同件是否緊固。
2, check all fasteners are fastened.
3、檢查傳動皮帶是否安裝正確和情況良好，若發現皮帶破損應及時更換，當皮帶或槽輪上有油污時，應用干凈抹布及時擦凈。
3, check the transmission belt is installed correctly and the situation is good, if found the belt breakage should be replaced, when the belt or groove wheel has oil, use clean cloth to wipe clean.
4、檢查破壁專用粉碎機防護裝置是否良好，若發現防護裝置有不安全現象，應及時排除。
4, check the broken special crusher protection device is good, if it is found that the protective device is not safe, should be excluded.
5、檢查破損腔內有無物料或其他雜物，若有時應清除干凈。
5, check the broken cavity there is no material or other debris, if sometimes should be cleared.
6、檢查破壁專用粉碎機液壓起頂機頂頭或起頂絲桿是否退回，調整墊片是否安裝正確和壓緊。
6, special mill hydraulic, check the broken top machine plug or top wire rod are returned, adjusting shim is installed correctly and pressing.